World's first custom mobile flash tuning platform for the BMW F series. Developed and tested in-house from the ground up over the course of almost 2 years with more features being added regularly makes the bootmod3 platform a custom BMW factory DME tuning solution like no other on the market today.
- Once license is added to your cart please enter your full VIN in the box labelled 'special instructions for seller'
- Bootmod3 ( BM3) is a digital license, you will be emailed an activation code with instructions within 2 business days ( Monday - Saturday)
- In order to flash your car you will need to purchase an enet cable ( amazon has them readily available) so please ensure you have this prior to flashing.
What Can I do with Bootmod3?
Build the ultimate tune for your N55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
bootmod3 app and cloud services offer many unique features not found in any other flash tune including and currentlyavailable:
- Mobile app (Android 4.1+ minimum, Android 5.1+ recommended)
- One OTS map/tune included with the purchase
- Datalogging over 200 diagnostic channels, up to 40 channels concurrently
- Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
- Cloud based storage for map data and datalogs
- Reverting back to stock performance map
- Live Dash - realtime vehicle parameter monitoring via in-app guages
- Read and clear trouble codes in all vehicle modules
- Reset learned adaptations (octane, knock, Valvetronic, etc)
- ECU power reset
- (Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane at $50 per map
- (Optional) Custom tuning for non-standard vehicle hardware and alternative fuels such as E85 and race gas
- Customization of an existing OTS map $300 per map
- Prior OTS map purchase required
Some of the map features provided:
- Top speed limiter removal
- Higher rev limiter
- Cold start cat heat cycle and cat efficiency check removed (for off-road use)
- Maps for upgraded turbos
- E85/blend, race gas and meth injection tuning
- Custom Throttle mapping
- Backend Flash maps for use with piggybacks such as the JB4
*** One-time DME unlock required for OBD access. CLICK HERE if you're mailing your DME to us.
*** OBD ENET cable required,
*** bootmod3 OBD Agent device is recommended but not required to use the bootmod3 platform. It removes the need for a laptop in the car for using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring while reducing cost then using your laptop instead of our device may be the ticket for you.
NOTE: If removing DME, ensure battery is disconnected.
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.